W730 Road Widener Specifications
Weight 33,500 lb (15,200 kg)
Opt. 40,000 lbs (18,181 kg)
Engine 174 hp (130 kW) Cat 3056E ATAAC
Hydraulic Drive 4-wheel hydrostatic drive
Lockable differential
2-speed motors
2-speed gearbox
Steering 4-wheel steer
3 steering modes
Suspension (4) 385/65Rx22.5
16-ply pneumatic tires
Speeds (max)
Low

High
0 - 180 fpm (0-55m/min) @ 0 - 7.2 mph (0-11.6 kph)
0 - 350 fpm (0-107/min) @ 0 - 14 mph (0-22.5 kph)
Conveyor
Belt Width
Shift
30" (762 mm)
6" (152 mm) either side, opt. 10" (254 mm)

Dimensions
Length

Width
Height
Wheel Base
25'8" (7.82 m) without weight kit
26'9" (8.15 m) with weight kit
10'0" (3 m)
9'7" (2.9 m)
180" (4,572 mm)
Working Width 1' 10" (.6m), 14' (4.3 m) w/ options
Working Depth 12" (305 mm) above and below grade
Turning Radius 14' (4m) outside tires
Capacities
Fuel
Hydraulic Oil
62 gal (235 L)
50 gal (189 L)
Strike-off Tools One 2' - 3' (0.6 m - 0.3 m) telescoping
One each 1',2',3',6' (0.3m, 0.6m, 0.9m, 1.8m)


W730 Road Widener

An independent, variable-speed hydraulic dual-end drive system — complete with two high-torque direct-drive motors — powers the 30-inch wide conveyor belt at speeds ranging from 0 to 80 fpm. Discharge speed is controlled from the conveyor speed lever on the operator's console, and discharge direction is controlled by a switch on the station.

The large-capacity receiving hopper has a 9-foot 4-inch opening with a hydraulic dump lip for cleanout after each truck load to help reduce hand work. Self-cleaning head, tail, and return pulleys minimize material buildup.

This heavy-duty, self-propelled road widener is designed to handle a variety of widening applications and materials. It is capable of widening from one to 10 feet with a working depth from 12 inches above grade to 12 inches below grade. With the optional long conveyor and weight kit, it can widen roads up to 14 feet.

Equipment Features
Optional truck hitch
Additional operator seat
Strobe light
Strike-off washdown system
10' or 12' rear-mount broom
6,500 lb counterweight
Grade and slope control prep group with standard or proportional valves
14' paving group (requires 6,500 lb counterweight and 12' conveyor)
12' conveyor
Opposite side mounts and hydraulics
Opposite side strike-off tools
 Optional dual side controls  
 Cab  
 9 KW Generator  
 Hydraulic push beams  

TH_W730Literature.jpg